How to Wear 22mm White Blind and Eyeball Sclera Lenses
By All Hand-painted style, natural | Published: 2026-11-03
Category: How-to Guides
A step-by-step guide to inserting, centering, and removing 22mm full white sclera contacts, with checkpoints for comfort, hygiene, and a convincing blind-eye or horror look.
Quick answer
Soak your 22mm sclera lenses in fresh multi-purpose solution for at least four hours, wash and dry your hands, then insert each lens with your eyelids held wide open and your gaze fixed on a mirror. Center the lens by looking straight ahead, blink gently, and remove it with a clean pinching motion after rewetting.
Why 22mm lenses need a slower, more deliberate insertion
A 22mm sclera lens covers part of the white of your eye, so it has a larger surface area than a standard cosmetic lens. That extra material makes the lens feel heavier on the eye and easier to trap air bubbles or fold at the edge. Rushing the insertion is the most common reason people report stinging, slipping, or a lens that will not sit flat.
The two designs in this guide serve different looks. The 22mm White Blind gives a solid, opaque white eye for blind-character and horror costumes. The 22mm Eyeball Sclera is printed to resemble a stylized eyeball, so it reads as a creepy prop rather than a blank stare. Both are hydrogel lenses with a 40% water content and a 1-year shelf life, made in Korea by Crazy Lab. Neither product page lists a base curve beyond 11mm or a recommended wearing duration, so treat your own comfort and an eye-care professional's advice as the deciding factors.
What to check before the lens touches your eye
Inspect each lens in its blister or clean case under bright light. Look for tears, grit, or a lens that has dried out. A damaged lens should never go on your eye, even if the look is for a last-minute costume.
Check that your hands are free of lotion, soap residue, and lint. Wash with a mild, fragrance-free soap, rinse thoroughly, and dry with a lint-free towel. Long nails are a common cause of pinhole tears in sclera lenses, so keep the lens on your fingertip rather than pinched between nails.
Step-by-step insertion and removal
- Soak and rinse: Remove the lens from its blister and soak it in fresh multi-purpose solution for at least four hours before first wear. Rinse again with solution just before insertion. Common mistake: wearing a lens straight from the blister without soaking. Never use tap water or saliva to rinse a sclera lens.
- Wash and dry your hands: Wash with mild soap, rinse completely, and dry with a lint-free towel. Check that no soap residue remains on your fingertips. Common mistake: skipping the dry step, which makes the lens slip off your finger. If your hands still feel slick, wash and dry again before touching the lens.
- Place the lens on your fingertip: Set the lens concave-side up on your index finger and check that the edge is not folded. Look at the profile: a bowl shape is correct; a flared saucer shape means the lens is inside out. Common mistake: inserting an inside-out lens, which causes immediate discomfort. If the edge flares outward, flip the lens and check again.
- Hold your eyelids open: Use your middle finger to pull the upper lid up and your other hand to hold the lower lid down. Look straight ahead into a mirror. Common mistake: looking down or away, which rolls the lens under the lid. Keep your gaze fixed on your own eye in the mirror.
- Insert and center: Gently place the lens on the center of your eye and release your eyelids slowly. Look left, right, up, and down to let the lens settle. Common mistake: blinking hard immediately, which can fold the lens. If the lens feels off-center, close your eye and massage the upper lid gently toward the nose.
- Check comfort and vision: Give yourself a full minute before judging the fit. Mild awareness is normal at first; sharp pain, burning, or blurred vision is not. Remove the lens if discomfort persists. Common mistake: ignoring pain because the look is for a photo. Remove the lens if discomfort does not fade within a minute.
- Remove with clean, dry hands: Wash and dry your hands, then look up and pull the lower lid down. Pinch the lens gently between thumb and forefinger and lift it away. Common mistake: dragging the lens across the eye, which can scratch the surface. If the lens feels stuck, apply a drop of solution and blink before pinching again.
Product facts
- 22mm White Blind: 22mm diameter with an 11mm base curve, hydrogel, 40% water content, 1 pair per box. The large diameter gives full white coverage for blind-character looks, but the 11mm base curve means you should expect a learning curve before the lens feels settled.
22mm White Blind - 22mm Eyeball Sclera: 22mm diameter with an 11mm base curve, hydrogel, 40% water content, 1 pair per box. The printed eyeball design reads as a horror prop rather than a blank eye, so plan your makeup and lighting around the visible iris pattern.
22mm Eyeball Sclera
