How to Wear 17mm White Walker Sclera Lenses
By All Hand-painted style, natural | Published: 2026-10-26
Category: How-to Guides
Learn how to safely apply, wear, and remove 17mm White Walker sclera lenses for a full white-eye cosplay look, with step-by-step tips and common mistakes to avoid.
Quick Answer
To wear 17mm White Walker sclera lenses safely, start with clean hands and a clean lens, apply with the right technique, and always follow proper removal and care steps to protect your eyes.
Why 17mm Sclera Lenses Need Extra Care
Sclera lenses cover the entire visible eye surface, which means they are larger than standard lenses and require more careful handling. The 17mm diameter is a common size for a full white-eye effect, but it also means the lens sits closer to the sclera and can trap debris if not inserted cleanly.
Because the lens covers more of the eye, you need to ensure it is properly hydrated and free of any particles before insertion. A well-fitted lens should feel comfortable and stay centered; if it shifts or causes discomfort, remove it immediately.
Common Mistakes to Avoid
Many first-time wearers forget to wash and dry their hands thoroughly, which can transfer oils or dirt onto the lens. Another common error is inserting the lens without checking that it is right-side out, leading to irritation and blurry vision.
Skipping the recommended soaking time or using tap water to rinse the lens are also mistakes that can compromise eye health. Always use the provided lens solution and follow the storage instructions.
Step-by-Step Wear Guide
- Prepare Your Workspace and Hands: Wash your hands with soap and water, then dry them with a lint-free towel. Set up a clean, well-lit area with a mirror and your lens case, solution, and lens applicator if needed. Check that your nails are trimmed to avoid scratching the lens or your eye.
- Inspect and Rinse the Lens: Remove the lens from its blister pack and inspect it for any tears or debris. Rinse it with fresh lens solution, not water, and ensure it is not inside out. If the lens edges flare out like a bowl, it's inside out; flip it before inserting.
- Insert the Lens with a Steady Hand: Hold the lens on your fingertip, use your other hand to hold your eyelid open, and look straight ahead or slightly up. Gently place the lens on the eye and release your lids slowly, then blink to center it. If the lens feels uncomfortable or vision is blurry, remove and reinsert after checking for debris or orientation.
- Check Fit and Comfort: Look in the mirror to ensure the lens covers the white of your eye evenly and sits comfortably. If you feel any sharp pain, excessive tearing, or the lens moves too much, remove it immediately. A properly fitted lens should not shift when you blink or look around.
- Remove and Clean After Wear: Wash your hands again, then use a clean fingertip to slide the lens down to the lower sclera before pinching it gently to remove. Clean the lens with solution and store it in a fresh solution in its case. Never pull the lens directly off the center of your eye; always slide it first to avoid damaging the eye surface.
Product Facts
- 17mm White Walker: The 17mm White Walker has a diameter of 17mm and a base curve of 10mm, made from hydrogel with 40% water content. This size and material are designed for a full-coverage white-eye effect, but the hydrogel requires proper hydration and care to maintain comfort throughout wear.
17mm White Walker
