Why the 22mm Lizard Sclera Lens Needs Careful Application
The 22mm Lizard sclera lens creates a dramatic full-eye reptile effect, but its large diameter (22mm) and opaque design require a different technique than standard contact lenses. This guide walks you through the essential steps to apply and remove the lens safely, based on the lens's specific specifications.
Before you begin, understand that this 1-year hydrogel lens has a base curve of 11mm and water content of 40%. These numbers affect how the lens fits and feels. Always follow the manufacturer's instructions included with your pair.
Key Specifications That Affect Application
- 22mm Lizard: DIA size: 22mm The large 22mm diameter covers the entire visible eye, including the whites. This means the lens must be centered properly to avoid discomfort or movement.
22mm Lizard - 22mm Lizard: B.C: 11mm A base curve of 11mm is relatively flat, which helps the lens conform to the sclera. If the lens feels too tight or too loose, it may not be suitable for your eye shape.
- 22mm Lizard: Water Content: 40% 40% water content is moderate for a hydrogel lens. It means the lens retains moisture but may feel dry if worn for extended periods. Keep rewetting drops handy.
Step-by-Step Application for the 22mm Lizard Lens
Follow these steps carefully. Do not rush the process.
- 1. Wash and dry your hands: Use a mild, non-oily soap. Rinse thoroughly and dry with a lint-free towel. Oils or residues can damage the lens or cause eye irritation.
- 2. Inspect the lens and solution: Remove one lens from its separate blister. Check for any tears, debris, or inverted edges. Rinse with fresh multipurpose solution (never tap water).
- 3. Position the lens on your fingertip: Place the lens on the tip of your index finger, making sure it forms a clean bowl shape. The edges should not curl inward.
- 4. Hold your eye open: Use your other hand to hold your upper eyelid open. Tilt your head back slightly and look upward.
- 5. Insert the lens gently: Place the lens directly onto the eye. For a 22mm sclera lens, aim to center it over the cornea. The large diameter means it will settle onto the white of the eye.
- 6. Blink and adjust: Close your eyes slowly and roll them to help the lens settle. If the lens feels uncomfortable or moves excessively, remove and reinsert.
What to Do If the Lens Feels Uncomfortable
A properly fitted 22mm sclera lens should feel comfortable after a short adjustment period. If you experience persistent irritation, blurred vision, or redness, remove the lens immediately. Do not continue wearing it. Check for damage or debris, and consult an eye care professional if discomfort persists.
The 22mm Lizard lens is designed for cosmetic use. It should never be worn overnight, and always follow the recommended replacement schedule (1 year from opening, as per the manufacturer).
Removal and Storage Tips
To remove, wash your hands again. Look upward, pull down your lower eyelid, and slide the lens down to the white of the eye. Gently pinch it off with your thumb and index finger. Avoid pinching directly on the cornea.
Store each lens in its separate blister with fresh solution. Never reuse old solution. The 22mm Lizard comes as a pair in one box, with each lens in its own blister. Keep the blisters labeled to avoid mixing up left and right.
Important Safety Reminders
The 22mm Lizard sclera lens is a cosmetic product. It does not correct vision. Never share lenses with others. Replace the case every three months. If you have any eye condition or are prone to allergies, consult a doctor before use.
Because the lens covers the entire eye, it reduces oxygen flow to the cornea. Limit wear time to a few hours for events, and remove immediately if you feel discomfort. The hydrogel material (40% water content) helps maintain moisture, but it is not a substitute for proper care.
